DBCT Telemetry and Emergency Stop Upgrade

To improve the process efficiency of maintaining water levels at eleven different sites across South Australia, ATSYS was contracted for the PLC and SCADA control system works, of the Happy Valley Filtered Water Pump Station (FWPS) project. This process efficiency was improved by replacing legacy communication equipment, upgrading PLCs, installing new PLCs, and installing new HMIs at Happy Valley FWPS Site.

To improve the efficiency of grit and screenings removal and target treating projected peak inflow rates, ATSYS was contracted to complete the detailed design, construction, installation, and commissioning of the low voltage electrical and control systems for the Aldinga Wastewater Treatment Plant Inlet Works Project.

To improve trade waste processing and remove the need to redirect to other wastewater treatment plants, the Port Adelaide Relift Trade Waste Receival Station (PARPS) Project was initiated. ATSYS was contracted to design and construct new electrical and control systems for the PARPS VSD and Trade Waste Receival Station Upgrade.

To comply with Water Quality performance requirements and reduce the health risk to the community and plant workers from consumption of the treated water at the Hope Valley Water Treatment Plant, ATSYS successfully completed all electrical and controls design for the Hope Valley Water Treatment Plant Chlorine Plant Major Hazard Facility Project.

To reduce the number of overflows and environmental incidents at two Hallet Cove Wastewater Pump Stations, ATSYS successfully delivered all electrical and controls design & construct works for the Hallet Cove Wastewater Network Upgrade project.